|Line 1:||Line 1:|
<h1>Additional patches to stable releases</h1>
<h1>Additional patches to stable releases</h1>
Latest revision as of 21:02, 13 June 2013
This is now deprecated use hacking on backports.
Additional patches to stable releases
compat-drivers prioritizes pushing software to be upstreamed into respective Linux subsystem development trees. The stable compat-drivers releases are based on vanilla stable kernels and extra version stable (3.x.y) releases as published through the linux-stable.git tree. Stable fixes are propagated through the stable kernel fix propagation mechanism. At times however the stable kernel fix propagation mechanism may not allow OEMs/OSVs/users to get the latest stable patches in time for their own needs. Other times, some patches which are not necessarily "stable" fixes may be desired to be integrated into a stable release by a hardware manufacturer, for one reason or another. At times, a subsystem maintainer may be on vacation and stable fix patches may take a while to get to users. In the worst case scenario some patches may not have been submitted for public review yet, for whatever reason, but it may be desired to merge some temporary patches on a stable release. Because of all these reasons compat-drivers has extended the stable kernel fix propagation mechanism by enabling additional types of patches to be merged into a stable release. Upstream first is still prioritized by categorizing these patches.
There are five categories to compat-wireless' extra patches:
* pending-stable * linux-next-cherry-picks * linux-next-pending * crap * unified-drivers
We document these below.
Legend of additional patches
Releases can either be vanilla releases or have a series of additional patches applied to the release on top of the vanilla release. A flag is appeneded at the end of a release to annotate patches from a specific directory have been applied to this release. The appended extra flag meanings follows:
* -s - get and apply pending-stable/ from linux-next.git * -n - apply the patches linux-next-cherry-picks/ directory * -p - apply the patches on the linux-next-pending/ directory * -c - apply the patches on the crap/ directory * -u - apply the patches on the unified-drivers/ directory
Release with no extra flags are simply vanilla releases of the kernel. Users / Linux distributions are encouraged to use the -uspn releases if they are available, otherwise the -spn relases as these releases will have extra fixes not yet propagated. The -s flag for example indicates that the release has patches marked as stable which will be released by the next 3.x.y release of the kernel so you might as well get them now. Linux distributions are encouraged to use the extra flagged releases as well. We provide the vanilla releases for those Linux distributions which just want vanilla for whatever reason.
Each category is documented below.
Annotating cherry pick preference
If you want to annotate that a patch should be considered for inclusion into the stable releases of compat-drivers under linux-next-cherry-picks/ you can annotate it by adding a tag on the commit log line, Cc: firstname.lastname@example.org. An example follows. By annotating these patch a script can be used to scrape linux-next for extracting these patches when building a stable release.
commit 061acaae76dfb760f4f3fddf0cde43915b7d673c Author: Luis R. Rodriguez <email@example.com> Date: Wed Dec 7 21:50:07 2011 +0530 cfg80211: allow following country IE power for custom regdom cards By definition WIPHY_FLAG_STRICT_REGULATORY was intended to allow the wiphy to adjust itself to the country IE power information if the card had no regulatory data but we had no way to tell cfg80211 that if the card also had its own custom regulatory domain (these are typically custom world regulatory domains) that we want to follow the country IE's noted values for power for each channel. We add support for this and document it. This is not a critical fix but a performance optimization for cards with custom regulatory domains that associate to an AP with sends out country IEs with a higher EIRP than the one on the custom regulatory domain. In practice the only driver affected right now are the Atheros drivers as they are the only drivers using both WIPHY_FLAG_STRICT_REGULATORY and WIPHY_FLAG_CUSTOM_REGULATORY -- used on cards that have an Atheros world regulatory domain. Cards that have been programmed to follow a country specifically will not follow the country IE power. So although not a stable fix distributions should consider cherry picking this. Cc: firstname.lastname@example.org Cc: Paul Stewart <email@example.com> Cc: Rajkumar Manoharan <firstname.lastname@example.org> Cc: Senthilkumar Balasubramanian <email@example.com> Reported-by: Rajkumar Manoharan <firstname.lastname@example.org> Signed-off-by: Luis R. Rodriguez <email@example.com> Signed-off-by: John W. Linville <firstname.lastname@example.org>
These are patches merged into linux-next.git but that have not yet been merged into the linux-stable.git tree.
From the pending-stable/README:
Often right before the merge window we get a block on non oops/regression fixes for stable fixes. Some stable fixes often get propagated afterwards during the extraversion maintenance of the kernels. Right before the merge window circa rc4 and rc5 subsystem maintainers get pegged if they throw in non oops/regression fixes for Linus or their respective upstream maintainer. While this makes sense for tree management and stable release considerations we still need to get users some stable patches propagated. This directory is there to help with that. Only patches which have been merged into linux-next.git will be included in this directory which means you must post it and the maintainer should have merged it and Stephen would have picked it up. This directory will always be empty for bleeding edge releases as bleeding edge releases are always based on linux-next already. This directory only makes sense for stable release of the kernel, and it we will always try to use it, in case there are stable fixes not yet propagated.
From the linux-next-cherry-picks/README:
We work hard to get patches in time onto the stable tree but sometimes a few things slip out, and sometimes a stable fix is simply too big in size to be merged into stable. In such cases though we do believe some of these patches are still relatively important to either enable new hardware which escaped the late rc cycles or to correct some behaviour which might be too late for stable. We apply these patches by default as they will be supported on these releases. The larger the number of patches you see in this directory the more we should be ashamed. We should strive to reduce this to 0 all the time. This directory will always be empty for bleeding edge releases as bleeding edge releases are always based on linux-next already.
From the linux-next-pending/README:
You must have a really good reason to be adding files in this directory. The requirement is your patches must have been posted to a public mailing list for the subsystem you are working on. Each patch you add here must have a really good explanation on the top of the file which clarifies why the patch has not yet been merged OR specify it on the commit log when you add it on compat-wireless. We try to avoid having patch files because but we understand if you might because you need to test code posted but not yet merged into linux-next or a stable kernel release. This can happen often during the merge window, when the maintainers are unavailable, on vacation, suck at what they do, or for any other uncontrollable reasons.
From the crap/README:
If you are including patches into this directory you must be fixing some critical bug for a customer which needs immediate release or immediate testing. Alternatively you would use this to apply some sort of crap code you are maintaining. You must have a really good reason to be adding files in this directory. If possible you should explain your reasoning of why the patch is getting included here and not upstream and why it hasn't even yet been posted. You should avoid these patches at all costs.
From the unified-drivers/README.md:
compat-drivers supports developers to supply a unified driver git tree which is being used to target support for getting the driver in line with requirements for linux-next. Once the driver gets upstream the driver gets removed and we cherry pick updated version of the driver directly from linux upstream. The code provided on this tree must try to adhere to conventions for targetting inclusion into linux-next. The compat-drivers patches/unified-drivers/ directory allows for any additional required backport delta to be addressed for the supplied driver. This allows development and transformation of the driver to always be targetting linux-next and allows for backporting to be dealt with separately. </code>